LM2903QPWRQ1 vs LM2903DR Comparaison
Comparaison détaillée côte à côte de LM2903QPWRQ1 par Texas Instruments et LM2903DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903QPWRQ1 - 36V Automotive Dual Comparator | Texas Instruments
LM2903QPWRQ1 ✓ ActifTexas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ ActifComparaison des spécifications
| Paramètre | LM2903QPWRQ1 | LM2903DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Type de sortie | Open-collector, rail-to-rail | Open-collector |
| Maximum Supply Voltage | 36 V | — |
| Supply Configuration | Single or dual supply | Single supply or split supply |
| Courant d'alimentation | 0.4 mA typical per comparator | — |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Offset Current | 3 nA typical | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | [DATA_NEEDED: AEC-Q100 qualification status] |
| Plage de température de fonctionnement | -40°C to 125°C | -40 °C to +125 °C |
| Boîtier | TSSOP (PW), 8 pins | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Supply Current Drain | Independent of supply voltage | — |
| ESD Performance | 2 kV HBM for the LM2903B-Q1 family | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals Status | [DATA_NEEDED: conflict minerals status] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: recommended output pull-up resistor] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Response Time | — | 300 ns |
| Channel Independence | — | Two independent comparator channels |
| Output Logic Style | — | Open-collector, pull-up resistor required |
| Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Courant de repos | — | [DATA_NEEDED: supply current per channel] |
| Propagation Delay | — | 300 ns response time |
| Output High Voltage | — | [DATA_NEEDED: output high-level voltage with pull-up] |