LM2903VQDRQ1 vs LM2903DR Comparaison
Comparaison détaillée côte à côte de LM2903VQDRQ1 par Texas Instruments et LM2903DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ ActifTexas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ ActifComparaison des spécifications
| Paramètre | LM2903VQDRQ1 | LM2903DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Type de sortie | Open-collector | Open-collector |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | 300 ns response time |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | [DATA_NEEDED: AEC-Q100 qualification status] |
| Plage de température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 8-pin SOIC (D) | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Response Time | — | 300 ns |
| Supply Configuration | — | Single supply or split supply |
| Channel Independence | — | Two independent comparator channels |
| Output Logic Style | — | Open-collector, pull-up resistor required |
| Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Courant de repos | — | [DATA_NEEDED: supply current per channel] |
| Output High Voltage | — | [DATA_NEEDED: output high-level voltage with pull-up] |