LM2903VQPWRG4 vs LM2903AVQPWR Comparaison
Comparaison détaillée côte à côte de LM2903VQPWRG4 par Texas Instruments et LM2903AVQPWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903AVQPWR - Dual Differential Comparator | Texas Instruments
LM2903AVQPWR ✓ ActifComparaison des spécifications
| Paramètre | LM2903VQPWRG4 | LM2903AVQPWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | Dual differential voltage comparator |
| Number of Channels | 2 channels | 2 |
| Supply Voltage Rating | 18 V | — |
| Response Time | 0.3 us | [DATA_NEEDED: response time] |
| Type de sortie | Open collector | Open-collector |
| Input Common-Mode Range | Rail-to-rail | — |
| Supply Configuration | Single supply or dual supplies | Single supply or dual supplies |
| Supply Current Drain | 0.4 mA typical per comparator | 0.4 mA typical per comparator |
| Boîtier | 8-TSSOP (PW) | 8-pin TSSOP (PW) |
| Package Width | 4.40 mm | — |
| Type de montage | Surface mount | Surface mount |
| Product Classification | Standard general-purpose comparator | — |
| Channel Independence | 2 independent channels | — |
| Output Pull-Up Requirement | [DATA_NEEDED: external pull-up resistor value] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40°C to 125°C |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Maximum Tested Supply Voltage | — | 30 V for V-suffix devices; 32 V for non-V devices |
| Input Configuration | — | Differential input |
| Lead Temperature | — | [DATA_NEEDED: lead temperature] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |