LM2904BIDR vs LM2904AQS-13 Comparaison
Comparaison détaillée côte à côte de LM2904BIDR par Texas Instruments et LM2904AQS-13 par Diodes Incorporated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2904BIDR | LM2904AQS-13 |
|---|---|---|
| Marque | Texas Instruments | Diodes Incorporated |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Manufacturer | Texas Instruments | — |
| Fonction | Industry-standard dual operational amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Supply Voltage Range (Single) | 3 V to 36 V | — |
| Supply Voltage Range (Dual) | +/-1.5 V to +/-18 V | — |
| Gain-Bandwidth Product (GBW) | 1.2 MHz | — |
| Slew Rate | 0.5 V/us (typical) | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 0.5 mV typical / 3 mV maximum | 2 mV |
| Input Bias Current | 25 nA typical | 20 nA |
| Input Common-Mode Range | GND to VCC - 1.5 V (single supply) | — |
| Output Swing | Rail-to-rail output | [DATA_NEEDED: output voltage swing] |
| Plage de température de fonctionnement | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | SOIC-8 (D) | 8-pin SO |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 1 (Unlimited) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free | Yes | — |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | General-purpose operational amplifier |
| Supply Voltage Range | — | 2 V to 36 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Courant d'alimentation | — | 500 uA class |
| Open-Loop Gain | — | 100 dB |
| Automotive Compliance | — | Automotive compliant |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Densité de bruit | — | [DATA_NEEDED: input noise density] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |