LM2904BIDR vs LM2904F-E2 Comparaison
Comparaison détaillée côte à côte de LM2904BIDR par Texas Instruments et LM2904F-E2 par ROHM Semiconductor. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
ROHM Semiconductor
LM2904F-E2 - Dual Ground-Sense Op Amp, 3-32V | ROHM Semiconductor
LM2904F-E2 NrndComparaison des spécifications
| Paramètre | LM2904BIDR | LM2904F-E2 |
|---|---|---|
| Marque | Texas Instruments | ROHM Semiconductor |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | NRND |
| Manufacturer | Texas Instruments | — |
| Fonction | Industry-standard dual operational amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Supply Voltage Range (Single) | 3 V to 36 V | — |
| Supply Voltage Range (Dual) | +/-1.5 V to +/-18 V | — |
| Gain-Bandwidth Product (GBW) | 1.2 MHz | — |
| Slew Rate | 0.5 V/us (typical) | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 0.5 mV typical / 3 mV maximum | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Common-Mode Range | GND to VCC - 1.5 V (single supply) | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | Rail-to-rail output | — |
| Plage de température de fonctionnement | -40 C to +125 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | SOIC-8 (D) | 8-pin SOP |
| Type de montage | Surface Mount | Surface mount, 8-pin SOP |
| Niveau MSL | 1 (Unlimited) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | Yes | — |
| Amplifier Type | — | Dual ground-sense operational amplifier |
| Number of Circuits | — | 2 circuits |
| Operating Supply Voltage Range | — | 3V to 32V |
| Product Classification | — | Standard general-purpose amplifier |
| Lifecycle Recommendation | — | Not recommended for new designs |
| Design Diversion Status | — | Not recommended for design diversion |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Voltage Gain | — | [DATA_NEEDED: open-loop voltage gain] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Total Quiescent Current | — | [DATA_NEEDED: total quiescent current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |