LM2904DGKR vs LM258ADGKR Comparaison

Comparaison détaillée côte à côte de LM2904DGKR par Texas Instruments et LM258ADGKR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2904DGKR LM2904DGKR - Dual 26V 700kHz Op Amp | Texas Instruments

LM2904DGKR - Dual 26V 700kHz Op Amp | Texas Instruments

LM2904DGKR ✓ Actif
Texas Instruments
LM258ADGKR LM258ADGKR - Dual 30V 700kHz Op Amp | Texas Instruments

LM258ADGKR - Dual 30V 700kHz Op Amp | Texas Instruments

LM258ADGKR ✓ Actif

Comparaison des spécifications

Paramètre LM2904DGKR LM258ADGKR
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier
Number of Channels 2 channels 2
Maximum Supply Voltage 26 V —
Gain-Bandwidth Product 700 kHz —
Type de sortie Push-pull —
Input Offset Voltage [DATA_NEEDED: input offset voltage for LM2904DGKR] —
Common-Mode Input Range Extends to ground —
Differential Input Voltage [DATA_NEEDED: maximum differential input voltage] —
Supply Operation Single supply or split supply —
Minimum Stable Gain 10 V/V —
Input Bias Current [DATA_NEEDED: input bias current] —
Input Resistance [DATA_NEEDED: input resistance] —
Output Current [DATA_NEEDED: output current] —
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Slew Rate [DATA_NEEDED: slew rate] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -25°C to 85°C
Boîtier 8-pin VSSOP 8-pin VSSOP (DGK)
Type de montage Surface mount Surface mount
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Amplifiers — 2
Maximum Total Supply Voltage — 30 V
Supply Voltage Range — 3 V to 32 V
Typical Gain-Bandwidth Product — 700 kHz
Typical Slew Rate — 0.3 V/µs
Maximum Input Offset Voltage — 3 mV
Typical Input Bias Current — 40 nA
Typical Supply Current — 0.7 mA
Courant d'alimentation — 800 µA
Typical Output Current per Channel — 30 mA
Input Common-Mode Range — Includes ground
Compensation — Internal
Supply Configuration — Single or split supply
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis