LM2904DR vs LM2904DR2G Comparaison
Comparaison détaillée côte à côte de LM2904DR par Texas Instruments et LM2904DR2G par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM2904DR | LM2904DR2G |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 2 | — |
| Supply Voltage (Single) | 3 V to 26 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±13 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Input Offset Voltage | 2 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Quiescent Current (per amplifier) | 500 uA (typical) | — |
| Total Supply Current | 0.7 mA (typical) | — |
| Common-Mode Input Range | Includes ground | Extends to ground or VEE |
| Output Stage | Class AB | — |
| Input Stage Latch-Up | Latch-up free | — |
| Short-Circuit Protection | Internal | — |
| Température de fonctionnement | -40C to +125C | — |
| Boîtier | 8-SOIC (D) | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| Amplifier Type | General Purpose | General purpose |
| Number of Amplifier Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 32 V |
| Plage de température de fonctionnement | — | -40°C to +105°C |
| Supply Configuration | — | Single supply or split supply |
| Power Consumption | — | Low power drain |
| Operational Amplifier Architecture | — | Bipolar |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Unity-Gain Stability | — | [DATA_NEEDED: unity-gain stability] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |