LM2904N vs LM293N Comparaison
Comparaison détaillée côte à côte de LM2904N par Texas Instruments et LM293N par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
LM293N - Dual Open-Collector Comparator, 8-DIP | STMicroelectronics
LM293N UnknownComparaison des spécifications
| Paramètre | LM2904N | LM293N |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Amplifier Count | 2 amplifiers | — |
| Product Family Supply Designation | 26 V | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Topologie | Dual independent operational amplifiers | — |
| Compensation | Internally frequency compensated | — |
| Supply Configuration | Single supply or split supply | Single supply or split power supplies |
| Common-Mode Input Range | Extending to ground/VEE | [DATA_NEEDED: common-mode input voltage range] |
| Power Drain | Low; numeric value [DATA_NEEDED: power drain] | — |
| Type de sortie | Push-pull | Open-collector |
| Boîtier | 8-pin PDIP | 8-DIP |
| Type de montage | Through-hole | Through-hole |
| Input Type | Differential | — |
| Product Classification | Standard general-purpose amplifier | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Statut RoHS | unknown | unknown |
| REACH Status | unknown | unknown |
| AEC-Q100 Qualification | not_applicable | — |
| Comparator Configuration | — | Dual independent comparator |
| Number of Channels | — | 2 channels |
| Input Function | — | Differential voltage comparison |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Response Time | — | [DATA_NEEDED: propagation delay] |
| Courant de repos | — | [DATA_NEEDED: supply current] |
| Logic Compatibility | — | External pull-up required for open-collector output |