LM2904PWRG3 vs LM2904QPWRQ1 Comparaison
Comparaison détaillée côte à côte de LM2904PWRG3 par Texas Instruments et LM2904QPWRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2904QPWRQ1 - Dual 26V 700kHz AEC-Q100 Op Amp | Texas Instruments
LM2904QPWRQ1 ✓ ActifComparaison des spécifications
| Paramètre | LM2904PWRG3 | LM2904QPWRQ1 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose | General-purpose operational amplifier |
| Number of Amplifiers | 2 circuits | — |
| Architecture | Two independent, frequency-compensated operational amplifiers | — |
| Maximum Total Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Typical Supply Current | 0.7 mA | — |
| Supply Configuration | Single supply or split supply | — |
| Boîtier | 8-TSSOP (PW), 0.173 in / 4.40 mm width | 8-pin TSSOP |
| Type de montage | Surface Mount | Surface mount |
| Packaging | Tape and Reel (TR) | — |
| Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | [DATA_NEEDED: open-loop gain] |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing] |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection configuration] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 qualified |
| Number of Channels | — | 2 channels |
| Maximum Supply Voltage | — | 26 V |
| Automotive Application | — | Yes |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | Exceeds 500 V per MIL-STD-883, Method 3015; exceeds 200 V using machine model |
| Moisture Sensitivity Level | — | MSL 1, 260 C/UNLIM |