LM2904QDRG4 vs LM2904QDRQ1 Comparaison

Comparaison détaillée côte à côte de LM2904QDRG4 par Texas Instruments et LM2904QDRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2904QDRG4 LM2904QDRG4 - Dual 26 V 700 kHz Op Amp | Texas Instruments

LM2904QDRG4 - Dual 26 V 700 kHz Op Amp | Texas Instruments

LM2904QDRG4 ✓ Actif
Texas Instruments
LM2904QDRQ1 LM2904QDRQ1 - Dual 26V 700kHz Op Amp AEC-Q100 | TI

LM2904QDRQ1 - Dual 26V 700kHz Op Amp AEC-Q100 | TI

LM2904QDRQ1 ✓ Actif

Comparaison des spécifications

Paramètre LM2904QDRG4 LM2904QDRQ1
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Prix unitaire (USD) — $0,22
Product Type Dual general-purpose operational amplifier —
Number of Amplifier Channels 2 circuits —
Maximum Total Supply Voltage 26 V —
Recommended Single-Supply Operation Up to 26 V —
Recommended Dual-Supply Operation ±13 V —
Gain-Bandwidth Product 700 kHz per channel 700 kHz (typ)
Slew Rate 0.3 V/µs 0.3 V/us (typ)
Typical Supply-Current Drain 0.7 mA —
Common-Mode Input Range Includes ground Includes ground (V-)
Compensation Internally frequency compensated —
Boîtier 8-SOIC, 3.90 mm body width SOIC-8 (D)
Package Body Width 3.90 mm —
Packaging Tape and reel —
Type de montage Surface mount Surface Mount
Application Category Automotive and industrial control systems —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] 2 mV (typ), 7 mV (max)
Input Bias Current [DATA_NEEDED: input bias current] 20 nA (typ)
Output Current [DATA_NEEDED: output current] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
Number of Channels — 2
Supply Voltage Range (single) — 3 V to 26 V
Supply Voltage Range (dual) — ±1.5 V to ±13 V
Supply Current per Amplifier — 500 uA (typ)
Output — Swings close to negative rail, not rail-to-rail
ESD Rating (HBM) — Exceeds 500 V (MIL-STD-883 Method 3015)
ESD Rating (MM) — 200 V
Automotive Qualification — AEC-Q100 qualified
Température de fonctionnement — -40C to +125C
Protection — Output short-circuit protection, internal frequency compensation

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis