LM2904QDRG4Q1 vs LM2904DT Comparaison
Comparaison détaillée côte à côte de LM2904QDRG4Q1 par Texas Instruments et LM2904DT par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ ActifSTMicroelectronics
LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT ✓ ActifComparaison des spécifications
| Paramètre | LM2904QDRG4Q1 | LM2904DT |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose, single-supply | Standard (General Purpose) |
| Number of Circuits | 2 (independent channels) | — |
| Supply Voltage Range | 3 V to 26 V | — |
| Maximum Supply Voltage | 26 V | [DATA_NEEDED: maximum supply voltage rating] |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Supply Current (per amplifier) | 0.7 mA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 65 dB | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Boîtier | 8-SOIC (DBV), 0.154 in (3.90 mm) width | SOIC-8 (8-SOIC / SOP-8) |
| Packaging | Tape and Reel (TR) | — |
| Type de montage | Surface Mount | Surface Mount |
| Nombre de broches | 8 | — |
| Compensation | Internal (internally compensated) | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Common-Mode Input Voltage Range | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] | — |
| Shutdown / Enable | None (no shutdown pin) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Number of Amplifiers | — | 2 |
| Number of Channels | — | 2 |
| Type de sortie | — | Single-Ended |
| Gain | — | High gain, internally frequency-compensated |
| Gain-Bandwidth Product | — | 1.1 MHz |
| Operating Voltage (listing designation) | — | 15 V |
| Supply Type | — | Single supply |
| Power Supply Drain | — | Low, independent of output voltage swing magnitude |
| Frequency Compensation | — | Internal (no external compensation network) |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Nombre de broches | — | 8 |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Target Applications | — | Automotive and industrial control systems |