LM2904QDRG4Q1 vs LM2904ST Comparaison
Comparaison détaillée côte à côte de LM2904QDRG4Q1 par Texas Instruments et LM2904ST par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2904QDRG4Q1 - Dual 26 V AEC-Q100 Op Amp, 700 kHz, SOIC-8 | Texas Instruments
LM2904QDRG4Q1 ✓ ActifComparaison des spécifications
| Paramètre | LM2904QDRG4Q1 | LM2904ST |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose, single-supply | General-purpose operational amplifier |
| Number of Circuits | 2 (independent channels) | — |
| Supply Voltage Range | 3 V to 26 V | [DATA_NEEDED: supply voltage range] |
| Maximum Supply Voltage | 26 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | [DATA_NEEDED: slew rate] |
| Supply Current (per amplifier) | 0.7 mA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 65 dB | — |
| Automotive Qualification | AEC-Q100 qualified | [DATA_NEEDED: AEC-Q100 qualification] |
| Boîtier | 8-SOIC (DBV), 0.154 in (3.90 mm) width | 8-pin MiniSO |
| Packaging | Tape and Reel (TR) | — |
| Type de montage | Surface Mount | Surface-mount |
| Nombre de broches | 8 | — |
| Compensation | Internal (internally compensated) | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Common-Mode Input Voltage Range | Includes ground; upper limit [DATA_NEEDED: common-mode input voltage range maximum] | — |
| Shutdown / Enable | None (no shutdown pin) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 channels |
| Number of Amplifiers | — | 2 amplifiers |
| Architecture | — | Two independent, internally frequency-compensated amplifiers |
| Type de sortie | — | Single-ended |
| Power Class | — | Low-power operational amplifier |
| Output Current | — | [DATA_NEEDED: output current] |
| Voltage Gain | — | [DATA_NEEDED: voltage gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |