LM324KD vs LM324D Comparaison
Comparaison détaillée côte à côte de LM324KD par Texas Instruments et LM324D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ ActifComparaison des spécifications
| Paramètre | LM324KD | LM324D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Quad general-purpose operational amplifier | Quad general-purpose operational amplifier |
| Number of Channels | 4 circuits | — |
| Maximum Supply Voltage | 30 V | — |
| Single-Supply Operating Range | 3 V to 32 V | — |
| Dual-Supply Operating Range | ±1.5 V to ±16 V | — |
| Gain-Bandwidth Product | 1.2 MHz | — |
| ESD Protection | 2 kV | 2 kV HBM for B, BA, and K versions |
| Output Current per Channel | 60 mA | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Instrumentation Amplifier Gain | 65 dB | — |
| Courant d'alimentation | 0.5 uA | — |
| Boîtier | 14-SOIC (0.154 inch, 3.90 mm width) | 14-pin SOIC |
| Nombre de broches | 14 pins | — |
| Type de montage | Surface mount | Surface mount |
| Operating Voltage Range | 3 V to 32 V | — |
| Common-Mode Input Range | Includes ground | [DATA_NEEDED: common-mode input range] |
| Supply Drain | Low and independent of supply voltage | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 4 |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| Supply Voltage Range | — | 3 V to 36 V for B versions |
| Input Offset Voltage | — | Plus or minus 2 mV maximum for BA versions at 25 C |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Supply Configuration | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Type de sortie | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Output Swing | — | [DATA_NEEDED: output swing] |