LM339ADR vs LM339NSRG4 Comparaison
Comparaison détaillée côte à côte de LM339ADR par Texas Instruments et LM339NSRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM339ADR - Quad Differential Comparator, SOIC-14 | Texas Instruments
LM339ADR ✓ ActifTexas Instruments
LM339NSRG4 - Quad Open-Collector Comparator | Texas Instruments
LM339NSRG4 ✓ ActifComparaison des spécifications
| Paramètre | LM339ADR | LM339NSRG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Quad differential comparator | — |
| Number of Channels | 4 | 4 channels |
| Type de sortie | Open-collector | Open-collector |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage (36 V) | — |
| Common-Mode Input Voltage Range | Includes ground (V-) | — |
| Input Bias Current | 3 nA | [DATA_NEEDED: typical input bias current] |
| Output Compatibility | TTL, MOS, CMOS, DTL, ECL | — |
| Output Saturation Voltage | Low (per TI product page) | — |
| Boîtier | 14-SOIC | 14-pin SOIC, PDSO14 |
| Type de montage | Surface Mount | Surface mount |
| Manufacturer Part Number | LM339ADR | — |
| Manufacturer | Texas Instruments | — |
| Catégorie | Comparators (Standard General Purpose) | — |
| Statut RoHS | [DATA_NEEDED: RoHS Status] | [DATA_NEEDED: RoHS status] |
| Plage de température de fonctionnement | [DATA_NEEDED: Operating Temperature Range] | [DATA_NEEDED: operating temperature range] |
| Response Time | [DATA_NEEDED: Response Time] | — |
| Supply Current (per comparator) | [DATA_NEEDED: Supply Current] | — |
| Comparator Type | — | Quad differential voltage comparator |
| Supply Configuration | — | Single supply or dual supply |
| Tested Maximum Supply Voltage | — | 30 V |
| Maximum Supply Voltage for Non-V Devices | — | 32 V |
| Typical Supply-Current Drain | — | 0.8 mA |
| Supply-Current Drain Dependence | — | Independent of supply voltage |
| Maximum Input Offset Voltage | — | 9 mV |
| Typical Response Time | — | 1300 ns |
| Nombre de broches | — | 14 pins |
| Application Category | — | General-purpose comparator |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |