LM339APWG4 vs LM339PWRG4 Comparaison

Comparaison détaillée côte à côte de LM339APWG4 par Texas Instruments et LM339PWRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM339APWG4 LM339APWG4 - 4-Channel 30V Comparator | Texas Instruments

LM339APWG4 - 4-Channel 30V Comparator | Texas Instruments

LM339APWG4 ⚠ Dernier achat
Texas Instruments
LM339PWRG4 LM339PWRG4 - Quad Differential Comparator | Texas Instruments

LM339PWRG4 - Quad Differential Comparator | Texas Instruments

LM339PWRG4 ✓ Actif

Comparaison des spécifications

Paramètre LM339APWG4 LM339PWRG4
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Dernier achat Actif
Comparator Type Quad differential comparator General-purpose differential comparator
Number of Channels 4 channels 4 channels
Type de sortie Open-collector Open collector
Single-Supply Operating Range 2 V to 30 V —
Dual-Supply Operating Range ±1 V to ±15 V —
Maximum Voltage Rating Up to 38 V —
Differential Input Voltage Range ±38 V Equal to maximum-rated supply voltage
Common-Mode Input Range Includes ground —
Low Input Offset Voltage 0.37 mV —
Low Input Bias Current 3.5 nA —
Courant d'alimentation 200 µA per comparator —
ESD Rating 2 kV HBM —
Logic Compatibility TTL, MOS, and CMOS Compatible with TTL, MOS, and CMOS
Boîtier 14-pin TSSOP (PW), 4.40 mm width 14-TSSOP, 4.40 mm width
Type de montage Surface mount Surface mount
Plage de température de fonctionnement 0 °C to 70 °C 0 °C to [DATA_NEEDED: maximum operating temperature]
Statut du cycle de vie Last Time Buy —
Statut RoHS [DATA_NEEDED: RoHS compliance status] —
REACH Status [DATA_NEEDED: REACH compliance status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Supply Configuration — Single supply or dual supply
Supply Voltage Range — [DATA_NEEDED: operating supply-voltage range]
Maximum-Rated Supply Voltage — 30 V for non-V devices
Tested Supply Voltage — 32 V for non-V devices
Typical Supply-Current Drain — 0.8 mA
Input Bias Current — [DATA_NEEDED: typical input-bias current]
Common-Mode Input Voltage Range — Includes ground
Output Saturation Voltage — Low; exact value not stated
Nombre de broches — 14 pins
Lead-Free Status — [DATA_NEEDED: lead-free status]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis