LM339DRE4 vs LM2904PW Comparaison
Comparaison détaillée côte à côte de LM339DRE4 par Texas Instruments et LM2904PW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM339DRE4 | LM2904PW |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Logic ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Quad differential comparator | — |
| Number of Channels | 4 channels | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Maximum Supply Rating | 38 V | — |
| Tested Supply Voltage | 30 V | — |
| Type de sortie | Open-collector | — |
| Input Offset Voltage | 0.37 mV | [DATA_NEEDED: input offset voltage] |
| Input Offset Voltage Maximum | 9 mV | — |
| Input Bias Current | 3.5 nA | [DATA_NEEDED: input bias current] |
| Courant d'alimentation | 200 µA per comparator | — |
| Response Time | 300 ns | — |
| Common-Mode Input Upper Limit | VCC - 1.5 V | — |
| Negative Input Swing Limit | -0.3 V below negative supply | — |
| ESD Rating HBM | 2 kV | — |
| Boîtier | 14-pin SOIC | 8-TSSOP, 4.40 mm width |
| Type de montage | Surface mount | Surface mount |
| Operating Temperature Grade | 0 °C to 70 °C | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Amplifiers | — | 2 circuits |
| Product Type | — | Dual general-purpose operational amplifier |
| Maximum Supply Voltage | — | 26 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Typical Supply Current | — | 0.7 mA |
| Supply-Current Independence | — | Independent of supply voltage |
| Supported Supply Configurations | — | Single supply or split supply |
| Common-Mode Input Range | — | Includes ground |
| Architecture | — | Voltage feedback, internally frequency compensated |
| Package Length | — | 4.40 mm |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |