LM339DTBR2 vs LM339PW Comparaison
Comparaison détaillée côte à côte de LM339DTBR2 par onsemi et LM339PW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM339PW - 4-Channel 36V Open-Collector Comparator | Texas Instruments
LM339PW ✓ ActifComparaison des spécifications
| Paramètre | LM339DTBR2 | LM339PW |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | General-purpose differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Configuration | Single supply | — |
| Operating Supply Voltage Range | 2 V to 36 V | — |
| Input Technology | CMOS | — |
| Type de sortie | Open-collector | Open-collector |
| Output Compatibility | TTL | Compatible with TTL, MOS, and CMOS |
| Boîtier | 14-pin TSSOP | 14-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Shipping Format | Tape and reel | — |
| Channel Count | 4 independent comparators | — |
| Input Polarity | Inverting and non-inverting inputs | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | Includes ground |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Supply Voltage Range | — | 2 V to 36 V |
| Maximum Family Rating | — | Up to 38 V |
| Propagation Delay | — | 300 ns |
| Family Response Time | — | 1 µs |
| Low Input Offset | — | 0.37 mV |
| Low Input Bias Current | — | 3.5 nA |
| Supply Current per Comparator | — | 200 µA typical |
| Differential Input Voltage | — | Equal to maximum-rated supply voltage, up to ±38 V |
| ESD Rating HBM | — | 2 kV |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |