LM339PWRG4 vs LM2904PW Comparaison

Comparaison détaillée côte à côte de LM339PWRG4 par Texas Instruments et LM2904PW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM339PWRG4 LM339PWRG4 - Quad Differential Comparator | Texas Instruments

LM339PWRG4 - Quad Differential Comparator | Texas Instruments

LM339PWRG4 ✓ Actif
Texas Instruments
LM2904PW LM2904PW - Dual 700 kHz Op Amp, 26 V | Texas Instruments

LM2904PW - Dual 700 kHz Op Amp, 26 V | Texas Instruments

LM2904PW ✓ Actif

Comparaison des spécifications

Paramètre LM339PWRG4 LM2904PW
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Comparator Type General-purpose differential comparator —
Number of Channels 4 channels —
Supply Configuration Single supply or dual supply —
Supply Voltage Range [DATA_NEEDED: operating supply-voltage range] —
Maximum-Rated Supply Voltage 30 V for non-V devices —
Tested Supply Voltage 32 V for non-V devices —
Typical Supply-Current Drain 0.8 mA —
Input Bias Current [DATA_NEEDED: typical input-bias current] [DATA_NEEDED: input bias current]
Common-Mode Input Voltage Range Includes ground —
Differential Input Voltage Range Equal to maximum-rated supply voltage —
Type de sortie Open collector —
Logic Compatibility Compatible with TTL, MOS, and CMOS —
Output Saturation Voltage Low; exact value not stated —
Boîtier 14-TSSOP, 4.40 mm width 8-TSSOP, 4.40 mm width
Nombre de broches 14 pins —
Type de montage Surface mount Surface mount
Plage de température de fonctionnement 0 °C to [DATA_NEEDED: maximum operating temperature] [DATA_NEEDED: operating temperature range]
Lead-Free Status [DATA_NEEDED: lead-free status] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
Number of Amplifiers — 2 circuits
Product Type — Dual general-purpose operational amplifier
Maximum Supply Voltage — 26 V
Gain-Bandwidth Product — 700 kHz
Typical Supply Current — 0.7 mA
Supply-Current Independence — Independent of supply voltage
Supported Supply Configurations — Single supply or split supply
Common-Mode Input Range — Includes ground
Architecture — Voltage feedback, internally frequency compensated
Package Length — 4.40 mm
Input Offset Voltage — [DATA_NEEDED: input offset voltage]
Slew Rate — [DATA_NEEDED: slew rate]
Statut RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis