LM358D vs LM2904DR2G Comparaison
Comparaison détaillée côte à côte de LM358D par Texas Instruments et LM2904DR2G par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM358D - Dual 700kHz General Purpose Op Amp | Texas Instruments (Tape & Reel)
LM358D ✓ ActifComparaison des spécifications
| Paramètre | LM358D | LM2904DR2G |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose Operational Amplifier | General purpose |
| Number of Circuits | 2 | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage (Single) | 3 V to 32 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±16 V | — |
| Supply Current (per channel) | 0.7 mA (typ) | — |
| Input Offset Voltage | 2 mV (typ), 7 mV (max) | [DATA_NEEDED: input offset voltage] |
| Common-Mode Input Range | Extends to ground (V-) | Extends to ground or VEE |
| Output Current | 20 mA (typ, short-circuit protected) | [DATA_NEEDED: output current] |
| Minimum Load Resistance | 2 kΩ | — |
| Température de fonctionnement | 0°C to +70°C | — |
| Boîtier | SOIC-8 (D) | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| Internal Compensation | Yes (unity-gain stable) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Number of Amplifier Channels | — | 2 channels |
| Supply Voltage Range | — | 3 V to 32 V |
| Plage de température de fonctionnement | — | -40°C to +105°C |
| Supply Configuration | — | Single supply or split supply |
| Power Consumption | — | Low power drain |
| Operational Amplifier Architecture | — | Bipolar |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Unity-Gain Stability | — | [DATA_NEEDED: unity-gain stability] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |