LM358N vs LM2904N Comparaison
Comparaison détaillée côte à côte de LM358N par Texas Instruments et LM2904N par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM358N | LM2904N |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,14 | $0,11 |
| Product Type | Dual operational amplifier | — |
| Number of Amplifiers | 2 independent amplifiers | — |
| Maximum Supply Voltage | 32 V | — |
| Typical Gain-Bandwidth Product | 1 MHz | — |
| Input Type | Differential input | Differential |
| Frequency Compensation | Internally frequency compensated | — |
| Supply Configuration | Single supply operation emphasized in the verified LM358 family description | Single supply or split supply |
| Boîtier | 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source | 8-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Nombre de broches | 8 pins | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | Extending to ground/VEE |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Noise | [DATA_NEEDED: noise voltage or noise density] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | not_applicable |
| Standardized Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Count | — | 2 amplifiers |
| Product Family Supply Designation | — | 26 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Topologie | — | Dual independent operational amplifiers |
| Compensation | — | Internally frequency compensated |
| Power Drain | — | Low; numeric value [DATA_NEEDED: power drain] |
| Type de sortie | — | Push-pull |
| Product Classification | — | Standard general-purpose amplifier |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Current | — | [DATA_NEEDED: output current] |