LM358N vs LM358AN Comparaison

Comparaison détaillée côte à côte de LM358N par Texas Instruments et LM358AN par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM358N LM358N - Dual 32 V 1 MHz Op Amp | DIP-8 Amplifier

LM358N - Dual 32 V 1 MHz Op Amp | DIP-8 Amplifier

LM358N ✓ Actif

Comparaison des spécifications

Paramètre LM358N LM358AN
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Dual operational amplifier —
Number of Amplifiers 2 independent amplifiers 2 (independent channels)
Maximum Supply Voltage 32 V —
Typical Gain-Bandwidth Product 1 MHz —
Input Type Differential input —
Frequency Compensation Internally frequency compensated —
Supply Configuration Single supply operation emphasized in the verified LM358 family description —
Boîtier 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source PDIP-8, 8-pin plastic dual in-line (through-hole)
Type de montage Through-hole Through-hole
Nombre de broches 8 pins —
Input Bias Current [DATA_NEEDED: input bias current] 20 nA typical
Input Offset Voltage [DATA_NEEDED: input offset voltage] 2 mV typical, 3 mV maximum
Slew Rate [DATA_NEEDED: slew rate] 0.3 V/us
Open-Loop Gain [DATA_NEEDED: open-loop gain] 100 dB minimum
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] Approximately 20 mV from each rail into 2 kOhm load
Courant d'alimentation [DATA_NEEDED: supply current] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] 0 C to +70 C
Noise [DATA_NEEDED: noise voltage or noise density] —
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Standardized Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Type — General-purpose, internally frequency-compensated, single-supply operational amplifier
Supply Voltage Range (single supply) — 3 V to 36 V
Maximum Total Supply Voltage — 36 V
Input Common-Mode Voltage Range — 0 V to (V+ minus 1.5 V)
Gain-Bandwidth Product — 1.0 MHz
Input Offset Current — 2 nA typical
Output Current — 40 mA typical source, 20 mA typical sink
Lead-Free Status — Lead-free (A suffix), RoHS compliant
Number of Outputs per IC — 2
Current Supply (Typ) — [DATA_NEEDED: total supply current typical]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis