LM358PWR vs TL072CP Comparaison
Comparaison détaillée côte à côte de LM358PWR par Texas Instruments et TL072CP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | LM358PWR | TL072CP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Amplifiers | 2 | — |
| Gain-Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | 13 V/µs (typical) |
| Supply Voltage Range (Dual) | ±1.5 V to ±16 V | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | 3 V to 32 V | 7 V to 36 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 3 mV (typical, C grade) |
| Input Bias Current | [DATA_NEEDED: input bias current] | 30 pA (typical) |
| Supply Current (per amplifier) | [DATA_NEEDED: supply current] | — |
| Common-Mode Input Range | Extends to ground (single-supply capable) | — |
| Differential Input Voltage Capability | High differential input voltage (per TI product page) | — |
| Boîtier | TSSOP-8 (PW) | — |
| Nombre de broches | 8 | 8 |
| Type de montage | Surface Mount | Through Hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0°C to +70°C (C grade) |
| Amplifier Type | General Purpose / Standard | JFET-Input Operational Amplifier |
| Next-Generation Upgrade | LM358B (36 V, pin-to-pin upgrade with improved performance) | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Boîtier / Format | — | 8-PDIP (Plastic DIP, through-hole) |
| Output Short-Circuit Protection | — | Yes |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |