LM393AM vs LM393DR Comparaison
Comparaison détaillée côte à côte de LM393AM par onsemi et LM393DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM393DR - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments
LM393DR ✓ ActifComparaison des spécifications
| Paramètre | LM393AM | LM393DR |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual differential comparator | — |
| Number of Channels | 2 channels | 2 |
| Single-Supply Operating Voltage | 36 V maximum | — |
| Dual-Supply Operating Voltage | ±18 V maximum | — |
| Current Drain | 800 µA typical | — |
| Input Bias Current | 25 nA typical | — |
| Type de sortie | Open collector | Open-Collector |
| Logic Compatibility | Compatible with all forms of logic | — |
| Ground-Level Comparison | Supported | — |
| Boîtier | 8-SOIC | SOIC-8 (D), 3.90 mm body width |
| Package Width | 3.90 mm (0.154 inch) | — |
| Type de montage | Surface mount | Surface Mount |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C |
| Statut RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Manufacturer | — | Texas Instruments |
| Part Number | — | LM393DR |
| Fonction | — | Dual Differential Comparator |
| Supply Voltage (Single) | — | 2 V to 36 V |
| Supply Voltage (Dual) | — | ±1 V to ±18 V |
| Input Offset Voltage (typical) | — | 1 mV |
| Input Bias Current (typical) | — | 25 nA |
| Supply Current per Comparator | — | 0.4 mA (typical) |
| Response Time | — | 1.3 µs (typical) |
| Common-Mode Input Range | — | 0 V to VCC − 1.5 V |
| ESD Rating (HBM, B-version) | — | 2 kV |
| Lead-Free | — | Yes |