LM393N vs LM393P3 Comparaison
Comparaison détaillée côte à côte de LM393N par Texas Instruments et LM393P3 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM393N | LM393P3 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Dual General-Purpose Comparator | Dual differential comparator |
| Number of Comparators | 2 (dual) | — |
| Type de sortie | Open-Collector / Open-Drain (single-ended) | Open collector |
| Input Offset Voltage (max) | 5 mV (LM393N); 2 mV (LM193/LM393A grade) | — |
| Input Bias Current (typ) | 25 nA | — |
| Supply Voltage Range (single supply) | 2 V to 36 V | — |
| Supply Voltage Range (dual supply) | ±1 V to ±18 V | — |
| Output Sink Current (max) | 16 mA | — |
| Propagation Delay (typ) | 1.3 us (300 mV overdrive) | — |
| Common-Mode Input Range | 0 V to VCC - 1.5 V (ground sensing) | — |
| Quiescent Current (typ) | 0.4 mA per comparator (0.8 mA total) | — |
| Plage de température de fonctionnement | 0 C to +70 C (LM393N) / -40 C to +85 C (LM2903N) | 0 °C to 70 °C |
| Boîtier | 8-PDIP (DIP-8, through-hole) | 8-PDIP |
| Type de montage | Through-Hole | Through-hole |
| Statut RoHS | Non-RoHS (LM393N); RoHS on LM393N/NOPB variant | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | 2 V to 30 V |
| Application Grade | — | Commercial grade |
| Nombre de broches | — | 8 pins |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Common-Mode Input Voltage Range | — | Includes ground |
| Differential Input Voltage Range | — | Equal to maximum-rated supply voltage |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Courant de repos | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |