LT1014DN vs LM324AN Comparaison
Comparaison détaillée côte à côte de LT1014DN par Texas Instruments et LM324AN par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LT1014DN | LM324AN |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 4 (Quad) | — |
| Amplifier Type | Precision Operational Amplifier | General-purpose operational amplifier |
| Supply Voltage Range (Single) | 5 V to 44 V | — |
| Supply Voltage Range (Dual) | ±2.5 V to ±22 V | — |
| Input Offset Voltage (Max) | 50 µV | — |
| Offset Voltage Drift (Max) | 0.3 µV/°C | — |
| Input Offset Current (Max) | 0.15 nA | — |
| Open-Loop Gain (Typical) | 8,000,000 (8 million) | — |
| CMRR (Min) | 117 dB | — |
| PSRR (Min) | 120 dB | — |
| Supply Current per Amplifier (Max) | 500 µA | — |
| Low-Frequency Noise (0.1 Hz to 10 Hz) | 0.55 µV P-P | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0°C to +70°C |
| Package Type | 14-pin PDIP (N) | — |
| Type de montage | Through-Hole | Through-hole |
| Statut RoHS | Compliant | — |
| Lead-Free | Yes | — |
| Number of Amplifiers | — | 4 circuits |
| Number of Independent Outputs | — | 4 outputs |
| Maximum Supply Voltage | — | 30 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Input Offset Voltage | — | 3 mV |
| Compensation | — | Internally frequency-compensated |
| Supply Configuration | — | Single or dual supply |
| Boîtier | — | 14-pin PDIP |
| Nombre de broches | — | 14 pins |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Current | — | [DATA_NEEDED: output current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current per amplifier] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |