MAX1067BCEE vs MAX1283AEEE Comparaison
Comparaison détaillée côte à côte de MAX1067BCEE par Maxim Integrated et MAX1283AEEE par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX1283AEEE - 12-Bit 300ksps 4-Ch Serial ADC | Maxim Integrated
MAX1283AEEE ✓ ActifComparaison des spécifications
| Paramètre | MAX1067BCEE | MAX1283AEEE |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,40 | $7,10 |
| Résolution | 14 bits | 12 bits |
| Sample Rate | 200 kSamples/sec | — |
| Number of Input Channels | 4 single-ended | 4 single-ended / 2 pseudo-differential |
| ADC Architecture | SAR (Successive Approximation) | — |
| Input Type | Single-Ended | Pseudo-Differential, Single-Ended |
| Type d'interface | SPI / QSPI / MICROWIRE-compatible serial | — |
| Analog Supply Voltage | +5 V | +2.7 V to +3.6 V |
| Digital Supply Voltage | +2.7 V to +5.25 V | +2.7 V to +3.6 V |
| Internal Reference Voltage | +4.096 V | — |
| Reference Drift | 60 ppm/°C max | — |
| SINAD | 81 dB min, 84 dB typ | — |
| SNR | 82 dB min, 84 dB typ | — |
| THD | -98 dB min, -86 dB typ | — |
| SFDR | 86 dB min, 99 dB typ | — |
| Full-Power Bandwidth (-3 dB) | 4 MHz | — |
| Full-Linear Bandwidth (SINAD > 81 dB) | 10 kHz | — |
| Supply Current (200 ksps) | 3.0 mA typ | — |
| Power-Down Current | 2 µA typ | — |
| Température de fonctionnement | 0°C to +70°C (commercial) | 0 C to +70 C (commercial) |
| Boîtier | 16-pin QSOP (MO-137AB) | 16-pin QSOP / TSSOP-16 (4.40 mm, 0.65 mm pitch, MO-153AC) |
| Fréquence d'échantillonnage | — | 300 ksps (400 ksps internal characterization) |
| Architecture | — | SAR (Successive Approximation) |
| Data Interface | — | SPI, QSPI, MICROWIRE, serial |
| Number of A/D Converters | — | 1 |
| Ratio of S/H to ADC | — | 1:1 |
| Internal Reference | — | 2.5 V |
| Reference Type | — | Internal (2.5 V) or external |
| Configuration | — | MUX-S/H-ADC |
| Type de montage | — | Surface Mount |
| Screening Level | — | Commercial |
| Pins | — | 16 |
| Courant d'arrêt | — | [DATA_NEEDED: shutdown current typical value] |
| Active Supply Current | — | [DATA_NEEDED: active supply current typical mA] |