MAX1093BEEG vs MAX1293AEEG+T Comparaison
Comparaison détaillée côte à côte de MAX1093BEEG par Analog Devices et MAX1293AEEG+T par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1093BEEG - 250ksps 10-Bit 4-Ch ADC +2.5V Ref | Maxim Integrated
MAX1093BEEG ✓ ActifMaxim Integrated
MAX1293AEEG+T - 12-Bit 250ksps 4Ch ADC +2.5V Ref | Maxim Integrated
MAX1293AEEG+T ✓ ActifComparaison des spécifications
| Paramètre | MAX1093BEEG | MAX1293AEEG+T |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,30 | $8,05 |
| Résolution | 10 bit | 12 bits |
| Fréquence d'échantillonnage | 250 ksps | — |
| Number of Input Channels | 4 single-ended / 2 pseudo-differential | — |
| Architecture | SAR (Successive Approximation) | — |
| Plage de tension d'entrée | 0 V to VREF (single-ended); ±VREF (pseudo-differential) | — |
| Tension d'alimentation | +2.7 V to +3.6 V | — |
| Supply Current (250 ksps) | 1.9 mA (typ) | — |
| Supply Current (Auto Power-Down) | 1 µA (typ) | — |
| Internal Reference | +2.5 V | — |
| INL (max) | ±1 LSB | — |
| DNL (max) | ±1 LSB | — |
| Wake-Up Time | 2 µs | 2 µs |
| Digital Interface | Byte-wide parallel | — |
| Plage de température de fonctionnement | -40 °C to +85 °C (industrial) | -40 °C to +85 °C (industrial) |
| Boîtier | 24-pin QSOP | 24-pin QSOP |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Number of Channels | — | 4 (single-ended) |
| Sample Rate | — | 250 ksps |
| Analog Supply Voltage (AVDD) | — | +2.7 V to +3.6 V |
| Digital I/O Supply (DVDD) | — | +1.8 V to AVDD |
| Internal Reference Voltage | — | +2.5 V |
| Input Range (Unipolar) | — | 0 to +VREF |
| Input Range (Bipolar) | — | ±VREF/2 |
| Supply Current at 250 ksps | — | 1.9 mA (typ) |
| Power-Down Current | — | [DATA_NEEDED: power-down current typ] |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL in LSB] |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL in LSB] |
| Signal-to-Noise + Distortion (SINAD) | — | [DATA_NEEDED: SINAD dB] |
| On-Chip Oscillator | — | 16 MHz internal |
| Interface | — | Byte-wide parallel (8-bit) |
| Terminal Form | — | Gull Wing |
| Niveau MSL | — | 1 |