MAX1154AEUE+T vs MAX1177CEUP+T Comparaison
Comparaison détaillée côte à côte de MAX1154AEUE+T par Maxim Integrated et MAX1177CEUP+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX1154AEUE+T - 10-Ch 10-Bit System Monitor ADC | Maxim Integrated
MAX1154AEUE+T ✓ Actif
Comparaison des spécifications
| Paramètre | MAX1154AEUE+T | MAX1177CEUP+T |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,45 | $8,45 |
| Fonction | 10-bit system-monitor ADC with internal temperature sensor and VDD monitor | — |
| Number of Channels | 10 (8 external analog + 2 internal: temperature, VDD) | 1 single-ended / 1 pseudo-differential |
| Résolution | 10 bit | 16 bits |
| Fréquence d'échantillonnage | 94 ksps (auto mode, single channel) | — |
| Analog Supply Voltage | 2.7 V to 5.25 V | +4.75 V to +5.25 V (5 V nominal) |
| Analog Input Range | 0 V to VREF (single-ended) | — |
| Internal Reference Voltage | 2.5 V (typ) | — |
| Courant d'alimentation | 1.7 mA at 3 V (94 ksps, single channel); 190 uA at 2 ksps; < 8 uA at 50 sps (AutoShutdown) | — |
| Operating Power | 5 mW at 3 V / 94 ksps | — |
| Digital Interface | SPI / QSPI / MICROWIRE-compatible serial | Byte-wide parallel (8-bit + read-only high/low byte select) |
| ALERT Output | Yes (out-of-threshold interrupt) | — |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 16-pin TSSOP, 4.4 mm body width, 1.1 mm height, surface mount | 20-pin TSSOP (MO-153AC) |
| Type de montage | Surface Mount | Surface Mount |
| ADC Architecture | SAR (successive approximation) | — |
| AutoShutdown | Yes | — |
| Statut RoHS | Compliant | Compliant |
| Architecture | — | SAR (Successive Approximation) |
| Sample Rate | — | 135 ksps |
| Digital Supply Voltage | — | +2.7 V to +5.25 V |
| Plage de tension d'entrée | — | 0 V to +4.096 V (internal ref); up to ±10 V with external resistors |
| Tension de référence | — | 4.096 V internal (external overdrive allowed) |
| INL (max) | — | ±2 LSB |
| DNL (max) | — | ±1 LSB (no missing codes) |
| SINAD | — | 84 dB at fin = 10 kHz |
| Power Consumption | — | 6.7 mW at 135 ksps; 1.4 mW at 10 ksps |
| Power-Down Current | — | 1 µA (typ) after conversion |
| Température de fonctionnement | — | 0 °C to +70 °C (commercial C grade) |
| Niveau MSL | — | 1 (unlimited floor life) |
| Internal Clock | — | Factory-trimmed (no external crystal required) |