MAX1177CEUP+T vs MAX1154AEUE+T Comparaison
Comparaison détaillée côte à côte de MAX1177CEUP+T par Analog Devices et MAX1154AEUE+T par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX1154AEUE+T - 10-Ch 10-Bit System Monitor ADC | Maxim Integrated
MAX1154AEUE+T ✓ ActifComparaison des spécifications
| Paramètre | MAX1177CEUP+T | MAX1154AEUE+T |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,45 | $4,45 |
| Résolution | 16 bits | 10 bit |
| Architecture | SAR (Successive Approximation) | — |
| Number of Channels | 1 single-ended / 1 pseudo-differential | 10 (8 external analog + 2 internal: temperature, VDD) |
| Sample Rate | 135 ksps | — |
| Analog Supply Voltage | +4.75 V to +5.25 V (5 V nominal) | 2.7 V to 5.25 V |
| Digital Supply Voltage | +2.7 V to +5.25 V | — |
| Plage de tension d'entrée | 0 V to +4.096 V (internal ref); up to ±10 V with external resistors | — |
| Tension de référence | 4.096 V internal (external overdrive allowed) | — |
| INL (max) | ±2 LSB | — |
| DNL (max) | ±1 LSB (no missing codes) | — |
| SINAD | 84 dB at fin = 10 kHz | — |
| Power Consumption | 6.7 mW at 135 ksps; 1.4 mW at 10 ksps | — |
| Power-Down Current | 1 µA (typ) after conversion | — |
| Digital Interface | Byte-wide parallel (8-bit + read-only high/low byte select) | SPI / QSPI / MICROWIRE-compatible serial |
| Température de fonctionnement | 0 °C to +70 °C (commercial C grade) | — |
| Boîtier | 20-pin TSSOP (MO-153AC) | 16-pin TSSOP, 4.4 mm body width, 1.1 mm height, surface mount |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 1 (unlimited floor life) | — |
| Statut RoHS | Compliant | Compliant |
| Internal Clock | Factory-trimmed (no external crystal required) | — |
| Fonction | — | 10-bit system-monitor ADC with internal temperature sensor and VDD monitor |
| Fréquence d'échantillonnage | — | 94 ksps (auto mode, single channel) |
| Analog Input Range | — | 0 V to VREF (single-ended) |
| Internal Reference Voltage | — | 2.5 V (typ) |
| Courant d'alimentation | — | 1.7 mA at 3 V (94 ksps, single channel); 190 uA at 2 ksps; < 8 uA at 50 sps (AutoShutdown) |
| Operating Power | — | 5 mW at 3 V / 94 ksps |
| ALERT Output | — | Yes (out-of-threshold interrupt) |
| Plage de température de fonctionnement | — | -40 C to +85 C |
| ADC Architecture | — | SAR (successive approximation) |
| AutoShutdown | — | Yes |