MAX1177CEUP+ vs MAX1177CEUP+T Comparaison
Comparaison détaillée côte à côte de MAX1177CEUP+ par Maxim Integrated et MAX1177CEUP+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX1177CEUP+ - 16-Bit 135ksps SAR ADC +18V Input | Maxim Integrated
MAX1177CEUP+ ✓ ActifComparaison des spécifications
| Paramètre | MAX1177CEUP+ | MAX1177CEUP+T |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,50 | $8,45 |
| Résolution | 16 bit | 16 bits |
| Fréquence d'échantillonnage | 135 ksps | — |
| ADC Architecture | SAR (Successive Approximation) | — |
| Analog Input Range | 0 to +10 V | — |
| Input Overrange Tolerance | Up to +/-18 V (with input resistor divider) | — |
| Number of Inputs | 1 single-ended input | — |
| Supply Voltage (Analog/Digital) | 4.75 V to 5.25 V | — |
| Supply Current (Full Throughput) | 26.5 mW / 31 mW (external/internal reference) | — |
| AutoShutdown Current | 0.4 mA at 10 ksps | — |
| Internal Reference Voltage | +4.096 V to +4.3 V | — |
| Integral Nonlinearity (INL) | [DATA_NEEDED: INL value] | — |
| Data Interface | Byte-wide parallel | — |
| Plage de température de fonctionnement | 0 C to +70 C (commercial grade) | — |
| Boîtier | TSSOP-20 (4.40mm body, MO-153AC) | 20-pin TSSOP (MO-153AC) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 1 (unlimited) | 1 (unlimited floor life) |
| Statut RoHS | Compliant | Compliant |
| Architecture | — | SAR (Successive Approximation) |
| Number of Channels | — | 1 single-ended / 1 pseudo-differential |
| Sample Rate | — | 135 ksps |
| Analog Supply Voltage | — | +4.75 V to +5.25 V (5 V nominal) |
| Digital Supply Voltage | — | +2.7 V to +5.25 V |
| Plage de tension d'entrée | — | 0 V to +4.096 V (internal ref); up to ±10 V with external resistors |
| Tension de référence | — | 4.096 V internal (external overdrive allowed) |
| INL (max) | — | ±2 LSB |
| DNL (max) | — | ±1 LSB (no missing codes) |
| SINAD | — | 84 dB at fin = 10 kHz |
| Power Consumption | — | 6.7 mW at 135 ksps; 1.4 mW at 10 ksps |
| Power-Down Current | — | 1 µA (typ) after conversion |
| Digital Interface | — | Byte-wide parallel (8-bit + read-only high/low byte select) |
| Température de fonctionnement | — | 0 °C to +70 °C (commercial C grade) |
| Internal Clock | — | Factory-trimmed (no external crystal required) |