MAX121CPE+ vs MAX121MJE Comparaison
Comparaison détaillée côte à côte de MAX121CPE+ par Analog Devices et MAX121MJE par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX121CPE+ | MAX121MJE |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | NRND |
| ADC Type | Successive-approximation sampling ADC | — |
| Résolution | 14 bit | 14 bit |
| Maximum Conversion Rate | 308ksps | — |
| SINAD | 78dB | 78 dB |
| Input Channel Count | 1 channel | — |
| Input Polarity | Single-ended with dual-polarity capability | — |
| Interface | Serial DSP interface | Serial, DSP-compatible |
| Architecture | BiCMOS | SAR (Successive Approximation) |
| Sample-and-Hold | On-chip track-and-hold | — |
| Internal Reference | On-chip low-drift, low-noise buried-zener reference | — |
| Operating Supply Value | 4.75 V | — |
| Clock Frequency Range | 1.1MHz to 5.5MHz | — |
| Logic Compatibility | TTL- and CMOS-compatible | TTL and CMOS |
| Boîtier | DIP-16, through-hole | CDIP-16 (through-hole) |
| Temperature Grade | Commercial | — |
| Nombre de broches | 16 pins | 16 |
| DIP Body Width | [DATA_NEEDED: DIP body width] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -55 C to +125 C (MIL) |
| Power Consumption | [DATA_NEEDED: power consumption] | 30 mW (typical at 308 ksps) |
| Plage de tension d'entrée | [DATA_NEEDED: analog input voltage range] | — |
| Sample Rate | — | 308 ksps |
| Number of Channels | — | 1 |
| Input Type | — | Single-Ended |
| External Clock Range | — | 1.1 MHz to 5.5 MHz |
| Tension d'alimentation | — | +5 V (analog), +5 V (digital) |
| Reference Type | — | Internal buried-zener (with external option) |
| Technology | — | BiCMOS |
| Type de montage | — | Through-Hole |
| Statut RoHS | — | [DATA_NEEDED: RoHS status for MAX121MJE ceramic DIP] |