MAX1231ACEG+ vs MAX1231ACEG+T Comparaison
Comparaison détaillée côte à côte de MAX1231ACEG+ par Maxim Integrated et MAX1231ACEG+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX1231ACEG+ - 12-Bit 300ksps 16-Ch SAR ADC | Maxim Integrated
MAX1231ACEG+ ✓ Actif
Comparaison des spécifications
| Paramètre | MAX1231ACEG+ | MAX1231ACEG+T |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,37 | $4,65 |
| Résolution | 12 bit | 12 bit |
| Sample Rate | 300 ksps | — |
| Number of Input Channels | 8 / 16 (selectable) | 8 or 16 single-ended (4 or 8 differential) |
| Input Configuration | Single-ended / pseudo-differential | — |
| Conversion Architecture | SAR (Successive Approximation) | — |
| Analog Supply Voltage (AVDD) | 3.0 V to 3.6 V | — |
| Digital Supply Voltage (DVDD) | 2.7 V to VAVDD | — |
| Courant d'alimentation | [DATA_NEEDED: AVDD + DVDD current] | — |
| Internal Reference | 2.5 V | — |
| External Reference Range | 1.0 V to AVDD | 1.0 V to VDD |
| Integral Nonlinearity (INL) | ±1 LSB (max) | — |
| Differential Nonlinearity (DNL) | ±1 LSB (max, no missing codes) | — |
| Signal-to-Noise + Distortion (SINAD) | [DATA_NEEDED: SINAD at 100 kHz input] | — |
| Internal FIFO Depth | 16 conversions | — |
| Capteur de température interne | Yes (±1 °C typical accuracy) | — |
| Serial Interface | SPI / QSPI / MICROWIRE-compatible | — |
| Maximum SCLK Frequency | 10 MHz | — |
| Input Fault Tolerance | ±6 V (clamped, no latch-up) | — |
| Boîtier | 24-QSOP (EG) | 24-pin QSOP |
| Plage de température de fonctionnement | 0 °C to +70 °C (commercial, C grade) | 0 °C to +70 °C (commercial, C-grade) |
| Type de montage | Surface Mount | Surface Mount |
| MSL Sensitivity Level | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | Compliant |
| Fréquence d'échantillonnage | — | 300 ksps |
| Architecture | — | SAR (Successive Approximation Register) |
| Input Type | — | Single-Ended / Differential (software configurable) |
| Data Interface | — | SPI / QSPI / MICROWIRE-compatible serial |
| Tension d'alimentation | — | 3 V or 3.3 V nominal |
| Supply Current (operating, 300 ksps) | — | 1.6 mA (typ) |
| Internal Reference Voltage | — | 2.5 V (A-grade) |
| Plage de tension d'entrée | — | 0 to VREF / ±VREF / 0 to 2×VREF / ±2×VREF |
| Internal FIFO | — | 16 entries |
| Internal Temperature Sensor Accuracy | — | ±1 °C |
| Linearity Error (INL) | — | ±1 LSB (max) |