MAX1237EUA+TGA8 vs MAX1237LEUA+ Comparaison
Comparaison détaillée côte à côte de MAX1237EUA+TGA8 par Analog Devices et MAX1237LEUA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1237EUA+TGA8 - 12-Bit 4-Ch 2-Wire Serial ADC | Analog Devices
MAX1237EUA+TGA8 ✓ Actif
Comparaison des spécifications
| Paramètre | MAX1237EUA+TGA8 | MAX1237LEUA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,85 | $6,95 |
| Résolution | 12 bit | 12 bit |
| Number of Input Channels | 4 single-ended (single-ended) | 4 single-ended / 2 differential |
| Architecture | SAR (Successive Approximation Register) | — |
| Fréquence d'échantillonnage | 94.4 ksps (max) | 94.4 kSPS |
| Supply Voltage Range | 2.7 V to 3.6 V or 4.5 V to 5.5 V | — |
| Supply Current (active) | 670 uA at max sampling rate | — |
| Supply Current (low-power) | below 230 uA | — |
| Internal Reference Voltage | 2.048 V (MAX1237) | — |
| External Reference Range | 1 V to VDD | — |
| Analog Input Range (FS) | 0 to VREF or 0 to VDD (when ext. REF applied) | — |
| Serial Interface | I2C-compatible 2-wire (400 kHz Fast Mode, 1.7 MHz High-Speed Mode) | — |
| Boîtier | 8-pin uMAX (uSOP) | 8-pin uMAX / uSOP (TSSOP-8, 3.0 mm body width) |
| Plage de température de fonctionnement | -40 C to +85 C | -40 C to +85 C (industrial, -L suffix) |
| Input Type | Single-ended | Single-ended or pseudo-differential, software configurable |
| Conversion Latency | SAR synchronous, no pipeline delay | — |
| Statut RoHS | ROHS3 Compliant | Compliant |
| Type de montage | Surface Mount | Surface Mount |
| Converter Architecture | — | SAR (Successive Approximation Register) |
| Supply Voltage (Low-Voltage Mode) | — | 2.7 V to 3.6 V |
| Supply Voltage (5 V Mode) | — | 4.5 V to 5.5 V |
| Supply Current at 94.4 kSPS | — | [DATA_NEEDED: full-scale supply current value] |
| Courant d'arrêt | — | < 1 microampere (software/hardware shutdown) |
| Internal Reference | — | 2.048 V (low-voltage mode) / 4.096 V (5 V mode) |
| External Reference Support | — | Yes |
| Digital Interface | — | I2C-compatible 2-wire serial |
| Number of Slave Addresses | — | 7 |
| Niveau MSL | — | 1 (per JEDEC J-STD-020) |