MAX1237LEUA+ vs MAX1237EUA+TGA8 Comparaison
Comparaison détaillée côte à côte de MAX1237LEUA+ par Analog Devices et MAX1237EUA+TGA8 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1237EUA+TGA8 - 12-Bit 4-Ch 2-Wire Serial ADC | Analog Devices
MAX1237EUA+TGA8 ✓ ActifComparaison des spécifications
| Paramètre | MAX1237LEUA+ | MAX1237EUA+TGA8 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,95 | $6,85 |
| Résolution | 12 bit | 12 bit |
| Number of Input Channels | 4 single-ended / 2 differential | 4 single-ended (single-ended) |
| Converter Architecture | SAR (Successive Approximation Register) | — |
| Fréquence d'échantillonnage | 94.4 kSPS | 94.4 ksps (max) |
| Supply Voltage (Low-Voltage Mode) | 2.7 V to 3.6 V | — |
| Supply Voltage (5 V Mode) | 4.5 V to 5.5 V | — |
| Supply Current at 94.4 kSPS | [DATA_NEEDED: full-scale supply current value] | — |
| Courant d'arrêt | < 1 microampere (software/hardware shutdown) | — |
| Internal Reference | 2.048 V (low-voltage mode) / 4.096 V (5 V mode) | — |
| External Reference Support | Yes | — |
| Digital Interface | I2C-compatible 2-wire serial | — |
| Number of Slave Addresses | 7 | — |
| Input Type | Single-ended or pseudo-differential, software configurable | Single-ended |
| Boîtier | 8-pin uMAX / uSOP (TSSOP-8, 3.0 mm body width) | 8-pin uMAX (uSOP) |
| Plage de température de fonctionnement | -40 C to +85 C (industrial, -L suffix) | -40 C to +85 C |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 1 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | ROHS3 Compliant |
| Architecture | — | SAR (Successive Approximation Register) |
| Supply Voltage Range | — | 2.7 V to 3.6 V or 4.5 V to 5.5 V |
| Supply Current (active) | — | 670 uA at max sampling rate |
| Supply Current (low-power) | — | below 230 uA |
| Internal Reference Voltage | — | 2.048 V (MAX1237) |
| External Reference Range | — | 1 V to VDD |
| Analog Input Range (FS) | — | 0 to VREF or 0 to VDD (when ext. REF applied) |
| Serial Interface | — | I2C-compatible 2-wire (400 kHz Fast Mode, 1.7 MHz High-Speed Mode) |
| Conversion Latency | — | SAR synchronous, no pipeline delay |