MAX128BCNG vs MAX164BCNG Comparaison
Comparaison détaillée côte à côte de MAX128BCNG par Maxim Integrated et MAX164BCNG par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX128BCNG | MAX164BCNG |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,27 | $13,25 |
| Résolution | 12 bit | 12 bit |
| Number of Analog Input Channels | 8 | — |
| Fréquence d'échantillonnage | 8 ksps | — |
| Tension d'alimentation | +5 V (single supply) | — |
| Plage de tension d'entrée | Software-selectable: 0 to VREF, 0 to VREF/2, ±VREF, ±VREF/2 | — |
| Internal Reference Voltage | 4.096 V | — |
| External Reference Support | Yes | — |
| Linearity (DNL/INL) | ±1/2 LSB | — |
| Track/Hold Bandwidth | 5 MHz | — |
| Fault-Protected Analog Inputs | ±16.5 V tolerant | — |
| Serial Interface | 2-wire I2C-compatible (SDA, SCL) | — |
| ADC Architecture | SAR (Successive Approximation) | — |
| Plage de température de fonctionnement | 0C to +70C (C grade) | — |
| Boîtier | 24-pin PDIP | PDIP-24 (through-hole, 0.300 inch row spacing) |
| Type de montage | Through-Hole | Through-Hole |
| Statut RoHS | Compliant (lead-free + suffix variants) | — |
| Number of Channels | — | 1 |
| Conversion Rate | — | 100 ksps |
| Architecture | — | SAR (Successive Approximation) with Track-and-Hold |
| Analog Input Range | — | 0 V to +5 V unipolar; ±5 V bipolar with external resistors |
| Supply Voltage (Analog V+) | — | +5 V nominal |
| Supply Voltage (Digital VDD) | — | +5 V nominal |
| Reference | — | Internal 5.0 V buried-zener, ±1.5% initial accuracy |
| Data Interface | — | Parallel, microprocessor-compatible (8/16-bit bus) |
| Integral Nonlinearity (INL) | — | ±1/2 LSB (typ) |
| Power Dissipation | — | [DATA_NEEDED: full-load power dissipation in mW] |
| Courant d'arrêt | — | less than 100 µA (hardware PD pin) |
| Température de fonctionnement | — | 0 °C to +70 °C (C grade, commercial) |
| Temperature Grade | — | COMMERCIAL |
| Terminal Form | — | THROUGH-HOLE |
| Lead Finish / RoHS | — | SnPb or Pb-free variant available; see ordering info |