MAX1393MTB+T vs MAX1396MTB+T Comparaison
Comparaison détaillée côte à côte de MAX1393MTB+T par Analog Devices et MAX1396MTB+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX1393MTB+T | MAX1396MTB+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,35 | $3,18 |
| Résolution | 12 bits | 12 bit |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation) |
| Fréquence d'échantillonnage | 312.5 ksps | — |
| Number of Channels | 1 differential / 2 single-ended (input mux) | 1 differential / 2 single-ended |
| Tension d'alimentation | 1.5 V to 3.6 V (single supply) | 1.5 V to 3.6 V |
| Supply Current (Active) | [DATA_NEEDED: full-load active current in mA] | — |
| Courant d'arrêt | [DATA_NEEDED: typical nA shutdown current] | — |
| Input Type | True differential or single-ended | True-Differential / Single-Ended (configurable) |
| Reference Type | External (up to AVDD) | — |
| Interface | SPI / QSPI / MICROWIRE-compatible, 3-wire serial | SPI / QSPI / MICROWIRE-compatible serial |
| Température de fonctionnement | -40 °C to +85 °C (industrial) | -55C to +125C (M-grade) |
| Boîtier | 10-pin TDFN-EP (3 mm × 3 mm) | TDFN-10 / HVSON-10 (3x3 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 1 |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Sample Rate | — | 312.5 ksps |
| Supply Current (active) | — | 690 uA (typ at 312.5 ksps) |
| Supply Current (shutdown) | — | <1 uA (automatic power-down) |
| Internal Oscillator | — | 3.84 MHz |
| Reference | — | Internal 2.5 V or external |
| SINAD | — | [DATA_NEEDED: SINAD in dB] |
| INL (max) | — | [DATA_NEEDED: INL in LSB] |