MAX145BEPA vs MAX145AEPA Comparaison
Comparaison détaillée côte à côte de MAX145BEPA par Maxim Integrated et MAX145AEPA par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX145BEPA | MAX145AEPA |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,29 | $5,20 |
| Résolution | 12 bits | 12 bits |
| Number of Channels | 2 (single-ended) | 2 |
| Sample Rate | 108 ksps | — |
| Conversion Time | 7.4 us (successive approximation) | 7.4 us (typical) |
| Wake-Up Time from Power-Down | 2.5 us | — |
| Analog Supply Voltage | +2.7 V to +5.25 V | — |
| Digital Logic Supply | Same as analog supply (single supply) | — |
| Input Type | Single-ended, CH0 / CH1 | True differential (MAX145) / single-ended selectable (MAX144) |
| Reference Input | External (REF pin) | — |
| Serial Interface | 3-wire SPI / QSPI / MICROWIRE-compatible | — |
| Built-in Clock | Yes (internal) | — |
| Automatic Power-Down | Yes (between conversions) | — |
| Boîtier | 8-pin PDIP (through-hole) | — |
| Plage de température de fonctionnement | -40 C to +85 C (industrial) | -40 C to +85 C (E suffix = industrial) |
| Type de montage | Through-Hole | Through-Hole (THT) |
| Niveau MSL | [DATA_NEEDED: MSL Level] | — |
| Statut RoHS | Compliant (MAX145BEPA+ variant) | Non-RoHS (pre-2011 vintage product; + variant is RoHS) |
| Part Number | — | MAX145AEPA |
| Manufacturer | — | Analog Devices (formerly Maxim Integrated) |
| Fonction | — | 12-bit 2-channel SAR analog-to-digital converter (ADC) |
| Sampling Rate (Throughput) | — | 108 ksps |
| Conversion Architecture | — | Successive-approximation (SAR) |
| Wake-Up Time | — | 2.5 us |
| Supply Voltage (VDD) | — | +2.7 V to +5.25 V (single supply) |
| Active Power Consumption | — | 3.2 mW at VDD = +3.6 V |
| Courant d'arrêt | — | < 10 uA (auto power-down) |
| Integral Nonlinearity (INL) | — | ±1 LSB (max) |
| Differential Nonlinearity (DNL) | — | ±0.5 LSB (max, no missing codes) |
| Digital Interface | — | 3-wire SPI / QSPI / MICROWIRE-compatible serial |
| Boîtier / Format | — | 8-pin PDIP (0.300 inch / 7.62 mm body) |
| Internal Reference | — | +2.5 V |