MAX1480BCPI+ vs MAX1480AEPI+ Comparaison
Comparaison détaillée côte à côte de MAX1480BCPI+ par Analog Devices et MAX1480AEPI+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActifAnalog Devices
MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480AEPI+ ✓ ActifComparaison des spécifications
| Paramètre | MAX1480BCPI+ | MAX1480AEPI+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Débit de données | 250 kbps | 250 kbps |
| Receiver Hysteresis | 70 mV | — |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| Boîtier | 28-PDIP (0.600", 15.24 mm wide) | 28-pin PDIP, 0.600 inch, 15.24 mm |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | — |
| Type de montage | Through-Hole | — |
| Température de fonctionnement | -40C to +85C | — |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | Isolated RS-485/RS-422 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Supported Interfaces | — | RS-485 and RS-422 |
| Tension d'alimentation | — | +5 V on the logic side |
| Isolation Architecture | — | Electrically isolated |
| Style de montage | — | Through-hole |
| Logic-Side Supply Architecture | — | Single +5 V supply powers both sides of the interface |
| Application | — | Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces |
| Manufacturer Family | — | MAX1480A/B/C |
| Available Package Configuration | — | 28-pin DIP |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Isolation Voltage Rating | — | [DATA_NEEDED: isolation voltage rating] |