MAX1480BCPI+ vs MAX1480CEPI+ Comparaison
Comparaison détaillée côte à côte de MAX1480BCPI+ par Analog Devices et MAX1480CEPI+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1480BCPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480BCPI+ ✓ ActifAnalog Devices
MAX1480CEPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480CEPI+ ✓ ActifComparaison des spécifications
| Paramètre | MAX1480BCPI+ | MAX1480CEPI+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Débit de données | 250 kbps | — |
| Receiver Hysteresis | 70 mV | — |
| Supply Voltage (Logic Side) | 5 V (single supply) | — |
| Boîtier | 28-PDIP (0.600", 15.24 mm wide) | 28-PDIP (28-pin plastic DIP, through-hole) |
| Isolation Voltage | 1000 Vrms (galvanic, transformer-based) | — |
| Type de montage | Through-Hole | Through-hole |
| Température de fonctionnement | -40C to +85C | — |
| Number of Nodes on Bus | Up to 32 transceivers | — |
| Slew Rate | Reduced (low-EMI drivers) | — |
| Construction | Hybrid microcircuit (CMOS + pulse transformer) | — |
| Statut RoHS | Compliant | unknown |
| Lead-Free / Halogen-Free | [DATA_NEEDED: lead-free / halogen-free status] | — |
| Product Type | — | 1/1 Transceiver Half (isolated RS-485/RS-422 interface) |
| Supported Standards | — | RS-485, RS-422 |
| Isolation | — | Electrically isolated (hybrid microcircuit with isolation barrier) |
| Supply Architecture | — | Single +5 V supply on the logic side powers both sides of the interface |
| Nombre de broches | — | 28 |
| Package Code / Shape | — | DIP, rectangular |
| Temperature Grade | — | Industrial |
| Driver Configuration | — | Half-duplex, 1 driver / 1 receiver |
| Driver Slew Rate | — | Reduced-slew-rate drivers (MAX1480B/C feature) to minimize EMI |
| Family Variants | — | MAX1480A / MAX1480B / MAX1480C share the 28-pin DIP package |
| Maximum Data Rate | — | [DATA_NEEDED: maximum signaling rate for MAX1480C variant] |
| Common-Mode Range | — | [DATA_NEEDED: bus-side common-mode voltage range] |
| Isolation Withstand Voltage | — | [DATA_NEEDED: isolation withstand voltage rating] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: minimum and maximum junction/ambient operating temperature] |
| Logic Supply Voltage Range | — | [DATA_NEEDED: VCC operating range] |