MAX1480CCPI+ vs MAX1480CEPI+ Comparaison
Comparaison détaillée côte à côte de MAX1480CCPI+ par Maxim Integrated et MAX1480CEPI+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX1480CEPI+ - Isolated RS-485/RS-422 Transceiver, 28-PDIP | Analog Devices
MAX1480CEPI+ ✓ ActifComparaison des spécifications
| Paramètre | MAX1480CCPI+ | MAX1480CEPI+ |
|---|---|---|
| Marque | Maxim Integrated | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Isolated RS-485/RS-422 transceiver | 1/1 Transceiver Half (isolated RS-485/RS-422 interface) |
| Driver and Receiver Configuration | 1 driver and 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Maximum Data Rate | 250 kbps | [DATA_NEEDED: maximum signaling rate for MAX1480C variant] |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Isolation | Galvanically isolated logic-side and bus-side interfaces | Electrically isolated (hybrid microcircuit with isolation barrier) |
| Driver Slew Rate | Reduced slew rate | Reduced-slew-rate drivers (MAX1480B/C feature) to minimize EMI |
| Supported Standards | RS-485 and RS-422 | RS-485, RS-422 |
| Boîtier | 28-pin DIP, 0.600 in (15.24 mm) width | 28-PDIP (28-pin plastic DIP, through-hole) |
| Type de montage | Through-hole | Through-hole |
| Logic-Side Supply | Single 5 V supply powers both sides of the interface | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: minimum and maximum junction/ambient operating temperature] |
| Isolation Voltage | [DATA_NEEDED: isolation withstand voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Statut RoHS | unknown | unknown |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Supply Architecture | — | Single +5 V supply on the logic side powers both sides of the interface |
| Nombre de broches | — | 28 |
| Package Code / Shape | — | DIP, rectangular |
| Temperature Grade | — | Industrial |
| Driver Configuration | — | Half-duplex, 1 driver / 1 receiver |
| Family Variants | — | MAX1480A / MAX1480B / MAX1480C share the 28-pin DIP package |
| Common-Mode Range | — | [DATA_NEEDED: bus-side common-mode voltage range] |
| Isolation Withstand Voltage | — | [DATA_NEEDED: isolation withstand voltage rating] |
| Logic Supply Voltage Range | — | [DATA_NEEDED: VCC operating range] |