MAX14821ETG+ vs MAX14882AWE+T Comparaison
Comparaison détaillée côte à côte de MAX14821ETG+ par Analog Devices et MAX14882AWE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14821ETG+ - IO-Link Device Transceiver, 24-TQFN | Analog Devices
MAX14821ETG+ ✓ ActifAnalog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ ActifComparaison des spécifications
| Paramètre | MAX14821ETG+ | MAX14882AWE+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,65 | $6,21 |
| Product Type | IO-Link Device Transceiver | — |
| Supply Voltage (VSUP) | 9 V to 36 V | — |
| Number of Transceivers | 1/1 | — |
| IO-Link Data Rates | COM1 4.8 kbps / COM2 38.4 kbps / COM3 230.4 kbps | — |
| C/Q Driver Configuration | Push-pull, high-side (PNP), or low-side (NPN), independently configurable | — |
| DO Driver Configuration | Push-pull, high-side (PNP), or low-side (NPN), independently configurable | — |
| Wake-up Output (WU) | Active-low, generated on C/Q wake-up detection | — |
| Internal Linear Regulators | Two LDOs (3.3 V and 5 V typical) | — |
| Digital Inputs (DI) | 24 V digital input with selectable current load | — |
| Digital Outputs (DO) | 24 V digital output driver | — |
| Température de fonctionnement | -40 C to +85 C | — |
| Boîtier | TQFN-24 (4x4 mm) | 16-pin Wide-body SOIC (W SOIC) |
| Type de montage | Surface Mount | Surface Mount |
| Compliance | IO-Link (IEC 61131-9) | — |
| ESD Protection | Integrated for industrial 24V port | — |
| Fonction | — | Isolated high-speed CAN transceiver |
| Débit de données | — | 1 Mbps |
| Isolation Voltage | — | 5 kVRMS |
| Controller-side Supply (VDDA) | — | 3.0 V to 5.5 V |
| Bus-side Supply (VDDB) | — | 4.5 V to 5.5 V |
| Receiver Input Common-Mode Range | — | -25 V to +25 V |
| Bus Fault Tolerance (CANH/CANL) | — | +/-54 V |
| ESD Protection (Bus-side, HBM) | — | +/-15 kV |
| Integrated LDO Output Current | — | 300 mA (max), 130 mA to internal load |
| Number of Drivers/Receivers | — | 1/1 (Half-Duplex CAN) |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| Creepage and Clearance | — | 8 mm |
| Standard | — | ISO 11898-2 compliant CAN |
| Statut RoHS | — | Compliant |