MAX14850ASE+ vs MAX14882AWE+ Comparaison
Comparaison détaillée côte à côte de MAX14850ASE+ par Analog Devices et MAX14882AWE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14850ASE+ - 6-Channel 600Vrms Digital Isolator | Analog Devices
MAX14850ASE+ ✓ ActifAnalog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ ActifComparaison des spécifications
| Paramètre | MAX14850ASE+ | MAX14882AWE+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | USB Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,41 | $6,18 |
| Part Number | MAX14850ASE+ | — |
| Manufacturer | Analog Devices / Maxim Integrated | — |
| Fonction | Six-Channel Digital Isolator | Isolated High-Speed CAN Transceiver |
| Number of Channels | 6 (3 forward / 3 reverse) | — |
| Isolation Voltage (RMS) | 600 Vrms | — |
| Surge Withstand | 2.5 kVrms | — |
| Common-Mode Transient Immunity (CMTI) | 1.5 kV/us (min), 25 kV/us (typ) | — |
| Maximum Data Rate | 50 Mbps | — |
| Minimum Data Rate (DC) | 2 Mbps | — |
| Propagation Delay | 30 ns (typical) | — |
| Supply Voltage (VDD1, VDD2) | 3 V to 5.5 V | — |
| Supply Current per Channel (typ) | 2.5 mA at 1 Mbps | — |
| Plage de température de fonctionnement | -40 C to +105 C | -40 °C to +125 °C |
| Boîtier | 16-SOIC (NSOIC, 0.154", 3.90 mm width) | 16-pin Wide SOIC (W SOIC) |
| Nombre de broches | 16 | — |
| Type de montage | Surface Mount | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | 1 | — |
| Protocol | — | ISO 11898-2 CAN |
| Number of Drivers/Receivers | — | 1/1 |
| Débit de données | — | up to 1 Mbps |
| Galvanic Isolation Voltage | — | 5000 VRMS (60s) |
| VDDA Supply Voltage (Controller-side) | — | 3.0 V to 5.5 V |
| VDDB Supply Voltage (Bus-side) | — | 4.5 V to 5.5 V |
| Receiver Common-Mode Range | — | -25 V to +25 V |
| CANH/CANL Fault Tolerance | — | ±54 V |
| ESD Protection (Bus-side, HBM) | — | ±15 kV |
| Integrated Transformer Driver | — | Yes |
| Auxiliary LDO Output Current | — | 130 mA internal / 300 mA max |
| Creepage and Clearance | — | 8 mm |