MAX14852GWE+ vs MAX14882AWE+T Comparaison
Comparaison détaillée côte à côte de MAX14852GWE+ par Analog Devices et MAX14882AWE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ ActifAnalog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ ActifComparaison des spécifications
| Paramètre | MAX14852GWE+ | MAX14882AWE+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,25 | $6,21 |
| Fonction | Transceiver | Isolated high-speed CAN transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 (Half-Duplex CAN) |
| Duplex | Full | — |
| Data Rate (low-speed mode) | 500 kbps | — |
| Data Rate (high-speed mode) | 25 Mbps | — |
| Galvanic Isolation Rating | 2.75 kVRMS (60 s) | — |
| Supply Voltage (VVDD / VBUS) | 1.71 V to 5.5 V | — |
| ESD Protection (HBM, bus pins) | ±35 kV | — |
| Température de fonctionnement | -40 °C to +105 °C | — |
| Boîtier | 16-pin WSOIC (7.50 mm body width) | 16-pin Wide-body SOIC (W SOIC) |
| Type de montage | Surface Mount | Surface Mount |
| Fail-safe Receiver | Yes | — |
| Hot-swap Tolerant | Yes | — |
| Statut RoHS | Compliant | Compliant |
| Isolation Technology | Maxim iso-loop (integrated transformer driver) | — |
| Débit de données | — | 1 Mbps |
| Isolation Voltage | — | 5 kVRMS |
| Controller-side Supply (VDDA) | — | 3.0 V to 5.5 V |
| Bus-side Supply (VDDB) | — | 4.5 V to 5.5 V |
| Receiver Input Common-Mode Range | — | -25 V to +25 V |
| Bus Fault Tolerance (CANH/CANL) | — | +/-54 V |
| ESD Protection (Bus-side, HBM) | — | +/-15 kV |
| Integrated LDO Output Current | — | 300 mA (max), 130 mA to internal load |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| Creepage and Clearance | — | 8 mm |
| Standard | — | ISO 11898-2 compliant CAN |