MAX14854GWE+ vs ISO7762FDWR Comparaison
Comparaison détaillée côte à côte de MAX14854GWE+ par Analog Devices et ISO7762FDWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO7762FDWR - 6-Ch Reinforced Digital Isolator, 5kVrms, 100Mbps | TI
ISO7762FDWR ✓ ActifComparaison des spécifications
| Paramètre | MAX14854GWE+ | ISO7762FDWR |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $2,74 |
| Product Type | Isolated full-duplex RS-485/RS-422 transceiver | — |
| Supply Voltage Range | 1.71V to 5.5V | — |
| Maximum Data Rate | 25Mbps | 100 Mbps |
| Low-Speed Data Rate | 500kbps | — |
| Galvanic Isolation | 2.75kV RMS for 60 seconds | — |
| ESD Protection | ±35kV | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Boîtier | 16-pin WSOIC | 16-pin SOIC Wide-Body (DW) - 7.50mm width |
| Type de montage | Surface mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Isolation Technology | [DATA_NEEDED: isolation technology] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Isolation Type | — | Capacitive Coupling (SiO2) |
| Number of Channels | — | 6 |
| Channel Direction | — | 4 Forward, 2 Reverse (4/2) |
| Isolation Voltage (RMS) | — | 5000 Vrms |
| Common-Mode Transient Immunity (CMTI) | — | 85 kV/us (minimum) |
| Propagation Delay (typ) | — | 11 ns |
| Channel-to-Channel Skew | — | 2.5 ns (max) |
| Input Supply Voltage Range (each side) | — | 2.25 V to 5.5 V |
| Output Supply Voltage Range (each side) | — | 2.25 V to 5.5 V |
| Default Output State (no VCC1) | — | Low |
| UVLO | — | Yes (both sides) |
| Plage de température de fonctionnement | — | -55C to +125C |
| Creepage/Clearance | — | 8 mm (DW package) |
| Safety Approvals | — | UL 1577, IEC 60747-17 (reinforced), VDE 033 60 (reinforced) |
| Niveau MSL | — | 2 |
| Lead-Free | — | Yes |