MAX14882AWE+ vs MAX22028AWA+ Comparaison
Comparaison détaillée côte à côte de MAX14882AWE+ par Analog Devices et MAX22028AWA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ ActifAnalog Devices
MAX22028AWA+ - 3.5kVRMS Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX22028AWA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX14882AWE+ | MAX22028AWA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | USB Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,18 | $3,45 |
| Fonction | Isolated High-Speed CAN Transceiver | Isolated half-duplex RS-485/RS-422 transceiver |
| Protocol | ISO 11898-2 CAN | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Débit de données | up to 1 Mbps | — |
| Galvanic Isolation Voltage | 5000 VRMS (60s) | 3.5 kVRMS (60 s, per datasheet) |
| VDDA Supply Voltage (Controller-side) | 3.0 V to 5.5 V | — |
| VDDB Supply Voltage (Bus-side) | 4.5 V to 5.5 V | — |
| Receiver Common-Mode Range | -25 V to +25 V | — |
| CANH/CANL Fault Tolerance | ±54 V | — |
| ESD Protection (Bus-side, HBM) | ±15 kV | — |
| Integrated Transformer Driver | Yes | — |
| Auxiliary LDO Output Current | 130 mA internal / 300 mA max | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 16-pin Wide SOIC (W SOIC) | 8-SOIC, wide body (5.5 mm creepage) |
| Creepage and Clearance | 8 mm | — |
| Statut RoHS | Compliant | Compliant |
| Duplex | — | Half duplex |
| Data Rate (max) | — | 16 Mbps |
| Supply Voltage (UART side) | — | 3.0 V to 3.6 V |
| Bus Fault Tolerance | — | [DATA_NEEDED: exact +/- V rating] |
| Creepage Distance | — | 5.5 mm (wide-body SOIC) |
| Température de fonctionnement | — | -40C to +85C |
| Type de montage | — | Surface Mount |
| AutoDirection Control | — | Yes (internal, no DE/RE pin required) |
| Hot-Swap Support | — | Yes (cable side) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |