MAX14882AWE+T vs ADM2567EBRNZ Comparaison
Comparaison détaillée côte à côte de MAX14882AWE+T par Analog Devices et ADM2567EBRNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ ActifAnalog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ ActifComparaison des spécifications
| Paramètre | MAX14882AWE+T | ADM2567EBRNZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,21 | $13,84 |
| Fonction | Isolated high-speed CAN transceiver | — |
| Débit de données | 1 Mbps | — |
| Isolation Voltage | 5 kVRMS | 3000 V rms |
| Controller-side Supply (VDDA) | 3.0 V to 5.5 V | — |
| Bus-side Supply (VDDB) | 4.5 V to 5.5 V | — |
| Receiver Input Common-Mode Range | -25 V to +25 V | — |
| Bus Fault Tolerance (CANH/CANL) | +/-54 V | — |
| ESD Protection (Bus-side, HBM) | +/-15 kV | — |
| Integrated LDO Output Current | 300 mA (max), 130 mA to internal load | — |
| Number of Drivers/Receivers | 1/1 (Half-Duplex CAN) | — |
| Plage de température de fonctionnement | -40 C to +125 C | [DATA_NEEDED: Operating temperature range] |
| Boîtier | 16-pin Wide-body SOIC (W SOIC) | 28-pin SOIC-W (0.295", 7.50 mm body width) |
| Creepage and Clearance | 8 mm | — |
| Type de montage | Surface Mount | Surface Mount |
| Standard | ISO 11898-2 compliant CAN | — |
| Statut RoHS | Compliant | Compliant |
| Data Rate (max) | — | 25 Mbps |
| Number of Channels | — | 4 (signal isolation) |
| Common-Mode Transient Immunity (CMTI) | — | 250 kV/us |
| Bus ESD (IEC 61000-4-2, contact) | — | ±15 kV (bus pins) |
| Bus ESD (IEC 61000-4-2, air) | — | ±15 kV |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | — | ±6 kV |
| Protocol | — | RS-422 / RS-485 |
| Logic-Side Supply (VIO) | — | 1.7 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Compliance | — | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) |
| Number of Drivers / Receivers | — | 1 / 1 |