MAX14882AWE+ vs MAX14852GWE+ Comparaison
Comparaison détaillée côte à côte de MAX14882AWE+ par Analog Devices et MAX14852GWE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+ ✓ ActifAnalog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ ActifComparaison des spécifications
| Paramètre | MAX14882AWE+ | MAX14852GWE+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | USB Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,18 | $7,25 |
| Fonction | Isolated High-Speed CAN Transceiver | Transceiver |
| Protocol | ISO 11898-2 CAN | RS-422, RS-485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Débit de données | up to 1 Mbps | — |
| Galvanic Isolation Voltage | 5000 VRMS (60s) | — |
| VDDA Supply Voltage (Controller-side) | 3.0 V to 5.5 V | — |
| VDDB Supply Voltage (Bus-side) | 4.5 V to 5.5 V | — |
| Receiver Common-Mode Range | -25 V to +25 V | — |
| CANH/CANL Fault Tolerance | ±54 V | — |
| ESD Protection (Bus-side, HBM) | ±15 kV | — |
| Integrated Transformer Driver | Yes | — |
| Auxiliary LDO Output Current | 130 mA internal / 300 mA max | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 16-pin Wide SOIC (W SOIC) | 16-pin WSOIC (7.50 mm body width) |
| Creepage and Clearance | 8 mm | — |
| Statut RoHS | Compliant | Compliant |
| Duplex | — | Full |
| Data Rate (low-speed mode) | — | 500 kbps |
| Data Rate (high-speed mode) | — | 25 Mbps |
| Galvanic Isolation Rating | — | 2.75 kVRMS (60 s) |
| Supply Voltage (VVDD / VBUS) | — | 1.71 V to 5.5 V |
| ESD Protection (HBM, bus pins) | — | ±35 kV |
| Température de fonctionnement | — | -40 °C to +105 °C |
| Type de montage | — | Surface Mount |
| Fail-safe Receiver | — | Yes |
| Hot-swap Tolerant | — | Yes |
| Isolation Technology | — | Maxim iso-loop (integrated transformer driver) |