MAX14882AWE+T vs MAX14850ASE+ Comparaison
Comparaison détaillée côte à côte de MAX14882AWE+T par Analog Devices et MAX14850ASE+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ ActifAnalog Devices
MAX14850ASE+ - 6-Channel 600Vrms Digital Isolator | Analog Devices
MAX14850ASE+ ✓ ActifComparaison des spécifications
| Paramètre | MAX14882AWE+T | MAX14850ASE+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,21 | $2,41 |
| Fonction | Isolated high-speed CAN transceiver | Six-Channel Digital Isolator |
| Débit de données | 1 Mbps | — |
| Isolation Voltage | 5 kVRMS | — |
| Controller-side Supply (VDDA) | 3.0 V to 5.5 V | — |
| Bus-side Supply (VDDB) | 4.5 V to 5.5 V | — |
| Receiver Input Common-Mode Range | -25 V to +25 V | — |
| Bus Fault Tolerance (CANH/CANL) | +/-54 V | — |
| ESD Protection (Bus-side, HBM) | +/-15 kV | — |
| Integrated LDO Output Current | 300 mA (max), 130 mA to internal load | — |
| Number of Drivers/Receivers | 1/1 (Half-Duplex CAN) | — |
| Plage de température de fonctionnement | -40 C to +125 C | -40 C to +105 C |
| Boîtier | 16-pin Wide-body SOIC (W SOIC) | 16-SOIC (NSOIC, 0.154", 3.90 mm width) |
| Creepage and Clearance | 8 mm | — |
| Type de montage | Surface Mount | Surface Mount |
| Standard | ISO 11898-2 compliant CAN | — |
| Statut RoHS | Compliant | Compliant |
| Part Number | — | MAX14850ASE+ |
| Manufacturer | — | Analog Devices / Maxim Integrated |
| Number of Channels | — | 6 (3 forward / 3 reverse) |
| Isolation Voltage (RMS) | — | 600 Vrms |
| Surge Withstand | — | 2.5 kVrms |
| Common-Mode Transient Immunity (CMTI) | — | 1.5 kV/us (min), 25 kV/us (typ) |
| Maximum Data Rate | — | 50 Mbps |
| Minimum Data Rate (DC) | — | 2 Mbps |
| Propagation Delay | — | 30 ns (typical) |
| Supply Voltage (VDD1, VDD2) | — | 3 V to 5.5 V |
| Supply Current per Channel (typ) | — | 2.5 mA at 1 Mbps |
| Nombre de broches | — | 16 |
| Niveau MSL | — | 1 |