MAX150AEWP+T vs MAX150AEWP+ Comparaison
Comparaison détaillée côte à côte de MAX150AEWP+T par Maxim Integrated et MAX150AEWP+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated
MAX150AEWP+T ✓ ActifComparaison des spécifications
| Paramètre | MAX150AEWP+T | MAX150AEWP+ |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,78 | $5,07 |
| Résolution | 8 bit | 8 bits (256 codes) |
| ADC Architecture | Half-flash (two-step) with track-and-hold | — |
| Number of Channels | 1 single-ended input | 1 single-ended input |
| Conversion Time (typ) | 1.34 us | — |
| Maximum Sample Rate | approx. 500 ksps | — |
| Analog Input Range | 0 V to +5 V (unipolar) | — |
| Tension de référence | Internal 2.5 V (external overdrive supported) | — |
| Analog Supply (AVCC) | +5 V nominal | — |
| Digital Supply (DVCC) | +5 V nominal | — |
| Typical Power Dissipation | 35 mW (analog) + 40 mW (digital) | — |
| Output Interface | Parallel 8-bit, three-state, microprocessor-compatible | — |
| Input Track-and-Hold Acquisition | approx. 100 ns to 0.01% accuracy | — |
| Plage de température de fonctionnement | -40 C to +85 C | 0 °C to +70 °C (commercial, EWP suffix) |
| Boîtier | 20-pin Wide-Body SOIC (EWP) | 20-pin SO (SOIC-20), gull-wing |
| Type de montage | Surface Mount (Tape & Reel) | Surface Mount |
| Statut RoHS | Compliant | Compliant (+ suffix indicates RoHS-compliant) |
| Manufacturer | — | Maxim Integrated (Analog Devices) |
| Part Number | — | MAX150AEWP+ |
| Fonction | — | 8-Bit Analog-to-Digital Converter (ADC) |
| Architecture | — | Half-Flash (Two-Step Flash) |
| Conversion Time | — | 1.34 µs (typical) |
| Conversion Rate | — | [DATA_NEEDED: max sample rate in ksps] |
| Analog Supply Voltage | — | +5 V (single supply) |
| Digital Supply Voltage | — | +5 V (single supply, TTL-compatible I/O) |
| On-Chip Reference | — | +2.5 V bandgap |
| Track/Hold Amplifier | — | Internal, integrated |
| Plage de tension d'entrée | — | 0 V to +5 V (unipolar, with internal reference) |
| Digital Output Interface | — | Three-state latching bus, 8080/6800 µP-compatible |
| Lead-Free | — | Yes |
| Screening Level | — | Commercial |