MAX150BEPP vs MAX148AEPP+ Comparaison
Comparaison détaillée côte à côte de MAX150BEPP par Maxim Integrated et MAX148AEPP+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX148AEPP+ - 10-Bit 8-Ch 133ksps 5.25V Precision ADC | Maxim Integrated
MAX148AEPP+ ✓ ActifComparaison des spécifications
| Paramètre | MAX150BEPP | MAX148AEPP+ |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $17,40 | $6,95 |
| Résolution | 8 bit | 10 bit |
| Number of Input Channels | 1 | — |
| Conversion Architecture | Half-flash (2-step flash) | — |
| Conversion Time (Typical) | 1.3 us | — |
| Analog Supply Voltage | +5 V | — |
| Analog Input Range | 0 V to +5 V | — |
| Integral Nonlinearity (INL) | ±1 LSB (max) | — |
| Differential Nonlinearity (DNL) | ±1 LSB (max) | — |
| Internal Reference Voltage | 2.5 V (bandgap) | — |
| Reference Accuracy | [DATA_NEEDED: ±% at 25C] | — |
| Track-and-Hold Acquisition | Internal (wideband) | — |
| Data Output Interface | Parallel, 8-bit, three-state | — |
| Power Dissipation | [DATA_NEEDED: mW at full operation] | — |
| Température de fonctionnement | 0 C to +70 C (E grade) | -40 °C to +85 °C (industrial) |
| Boîtier | 20-pin PDIP (PDIP-20) | 20-pin PDIP (DIP-20) |
| Type de montage | Through-Hole (DIP) | Through-Hole |
| Statut RoHS | Depends on suffix — MAX150BEPP (non-RoHS) / MAX150BEPP+ (RoHS) | Compliant |
| Family Member Variants | MAX150AEPP (-40 to +85C), MAX150BCPP (full -40 to +85C) | — |
| Number of Channels | — | 8 single-ended / 4 differential |
| Fréquence d'échantillonnage | — | 133 ksps |
| Tension d'alimentation | — | +2.7 V to +5.25 V |
| Supply Current (Active) | — | 1.2 mA typ at 133 ksps |
| Supply Current (Shutdown) | — | < 10 µA |
| INL (max) | — | ±1 LSB |
| DNL (max) | — | ±1 LSB |
| Input Type | — | Differential, Single-Ended |
| Data Interface | — | SPI / QSPI / MICROWIRE-compatible serial |
| Architecture | — | SAR (Successive Approximation) |
| Configuration | — | MUX-S/H-ADC |
| Ratio S/H:ADC | — | 1:1 |
| Number of ADCs | — | 1 |
| Reference Type | — | External (ratiometric or fixed) |
| Shutdown Pin | — | Yes (active-low SHDN) |